VENEER & PLYWOOD

Our products

Cildro Plywood  SRL plywood can be found all over the world (Europe, America, Asia) in construction halls of such world-renowned concerns Daimler Chrysler, Volkswagen, Audi, Porsche, Jaguar, General Motors, Skoda, Seat S.A. Major exhibition centers use Cildro Plywood  SRL plywood – both for proper plating floors, and walls and the ceilings. Optical appearance with “welcoming” and resistance to physical wear and traffic makes Cildro Plywood  SRL plywood implemented in many such centers exhibition (Expo Leipzig, Munich Expo, Romexpo Bucharest, Expo Koln)

Currently, our company makes 3 categories of products:

  • FAGOTEX
  • GLOBAL 100 HL
  • VANYCARE

 

Each of these products have different characteristics and they can be used for various purposes and in different domains of activity.

FAGOTEX CHARACTERISTICS

– Resistant to moisture

– 40% more resistant than other wood boards

– High resistance loads

FAGOTEX ® panels are laminated beech and they are specially designed for floors trucks and vans, but also for the construction industry. FAGOTEX ® panels are provided with a special coating of phenolic film, which increases the degree of resistance to moisture. Usually, a front plate is provided with a slip layer, and back to a layer of smooth phenolic film.
On request we can both sides with phenolic film skid or smooth.

FAGOTEX ®-plates are generally used in construction trucks, vans and transporting industrial and construction slip surfaces like floors.

FAGOTEX ® are a double strength compared to other boards other wood essences (birch, poplar etc).

FAGOTEX – Truck floor panels

EXTREMELY HARD AND WEAR RESISTANT

Bonding: dark bonding according with EN 314-2 (Class 3), bonding for humid environment and exterior protected environment

Surfaces: both sides with resistant synthetic phenolic film coating, colour dark brown, top sides nonskid, reverse side smooth

Sizes: 1500×2500 mm standard stock size, 1250×2500 or special size on request

Thicknesses: 9, 12, 15, 18, 21, 24, 27, 30 mm, other thicknesses on request

Edges: protected by paint

Density: approx. 750 kg/m3

Thickness tolerance: 6%

Bending strenght:

  • longitudinal 75N/nm^2
  • transverse 68N/nm^2

 

Elasticity module:

  • longitudinal 8300N/nm^2
  • transverse 7100N/nm^2

 

Gas analysis: 1,1 mg CH2O/m^2

Humidity: max. 8%

Quality guarantee: Quality control, grading, tolerances and technical data according with EN 315

GLOBAL 100 HL CHARACTERISTICS

 GLOBAL 100/HL

In order to obtain a modern design, both characterized by robustness, but also by heat, this plywood is used in modern architecture as interior building elements. For example, interior stairs made with this specific plywood can contribute to a warming and welcoming atmosphere.
Another area in which cards HL GLOBAL and GLOBAL have proven is the production of carpentry (doors and windows), characterized by a unique and modern design robustness. Cildro’s plywood is used by the largest automobile corporations in the construction of industrial plants. Due to their properties they have proved extremely feasible and, due to the natural appearance of wood, Cildro’s plywood have become the “standard” in the construction of industrial plants in the automotive industry.

Bonding : dark bonding according with EN 314-2 (Class 3), bonding for humid environment and exterior protected environment

Bonding HL : bright bonding according with EN 314-2 (Class 3) for dry environment

Sizes : 2500×1500 mm. Grain direction of face veneers runs parallel with the first dimension, 2500 x1250 or 1220 mm for complete truck loads upon request

Thicknesses : Approx. 10, 15, 18, 20, 25, 30, 40 mm.

Additional thicknesses up to 60 mm upon request

Face veneers : Rotary cut beech veneers, grade II/III according with EN 635-2, veneer thickness prior to pressing and sanding apoprox 2.2 mm, sanded on both sides

Core veneers : Rotary cut beech veneers, edge glued after first cutting out larger knots and splits, thickness prior to pressing typically approx. 2.2 mm, but can vary

Edges : Saw-cut, appearance of edge as per comments under „core veneers”, minor filling may be necessary

Density : approx. 750 kg/m3

Thickness tolerance: 6%

Bending strenght:

  • longitudinal 75N/nm^2
  • transverse 68N/nm^2

 

Elasticity module:

  • longitudinal 8300N/nm^2
  • transverse 7100N/nm^2

 

Gas analysis: 0,75 mg CH2O/m^2

Humidity: max. 8%

Quality guarantee : Quality control, grading, tolerances and technical data according with EN 315